Film Equipment Rental
-
ARCO DOLLY FULL SET
Include
- Porta Jib
- Riser and offset
- 5x Precission Straight Tracks
- 4x Precission Curve Tracks
-
ARRI ALEXA MINI LF
Best overall image quality in large format
- Immersive large-format look
- Lower noise with higher usable sensitivity
- Highest dynamic range of any production camera
- ARRI color science for natural skin tones, easy color correction and clean VFX
- Perfect for High Dynamic Range (HDR) and Wide Color Gamut (WCG) display
-
ARRI ALEXA MINI PRODUCTION PACKAGE
Camera alexa mini body ( ARRI RAW & ANAMORPHIC LICENSED )
ARRI Electronic viewfinder & Cable
ARRI FF4 follow focus set
Bridge plate, quick release, sliding plate
3x Lexar 256 GB C fast
1x CODEC card reader
5x FX lion 14,7 Volt V Mount Battery Pack with 4 ways Charger
Shoulder pad
TV logic 5.8″ or 5.6″ multiformat onboard monitor & noga arm
TV logic 17″ SDI monitor multiformat
2575D O connor Fluid head/ Sachtler 9+9 Fluid head
Tripod set ( Hi leg/ baby leg/ Hi hat )
Clapper board set (small, medium, large)
BNC Cable 25 meters -
ARRI ALEXA XR PRODUCTION PACKAGE
Camera alexa XR body ( ARRI RAW & ANAMORPHIC LICENSED )
ARRI FF4 follow focus set
Bridge plate, quick release, sliding plate
4x card CODEC
1 CODEC card reader
5 X FX lion 14,7 Volt V Mount Battery Pack with Charger
Shoulder pad
TV logic 7″ multiformat onboard monitor & Arm
TV logic 17 ” SDI Multiformat 17″ Monitor
2575D O connor Fluid head/ Sachtler 9+9 Fluid head
Tripod set ( Hi leg/ baby leg/ Hihat )
Clapper board set (small, medium, large)
BNC Cable 25 meters -
ARRI M18 /1800W WITH HIGHSPEED BALLAST 1000HZ
The M18 is an 1,800 W open face lamphead, combining the Academy Scientific and Engineering Award-winning lens-less optical technology of the ARRIMAX with the innovative True Blue design. The result is an extremely powerful lamphead, as small as a 1,200W PAR but with a 70 % higher light output. The M-Series M18 fixture is adjustable from 20° to 60° without requiring spreader lenses.
Features
- Lens-less MAX Technology: Easy to use
- New 1,800 W lamp
- Virtually the same size as a 1,200 W lamphead but more than 70 % brighter
- Runs from most domestic sockets world-wide
- Uses existing 575/1,200/1,800 W cables
- Can also be used with 1,200 W lamps and ballasts
- Cross Cooling allows safe operation at any tilt angle
- IP Rating IP23
- True Blue tilt lock holds even heavy Chimeras
- Easy maintenance
-
ARRI M25/ 2500W WITH HIGHSPEED BALLAST 1000HZ
A member of the ARRI M-Series, the M40 is a lens-less system that unifies the advantages of Fresnel and PAR fixtures. The unit is open face and thus very bright: around 30 % brighter than an AS40 in spot. Due to its unique, patented MAX Technology reflector, it is also focussable over a range of 18 to 52° Half Peak Angle. The M40 gives a remarkably even beam spread that casts crisp shadows over the whole focus range. The reflector characteristics is optimised for 4,000 W lamps, but can also be used with 2,500 W lamps.
The lamphead is equipped with a CCL module (Compensation of Cable Losses). When operated with the ARRI EB 2.5/4 kW High Speed AutoScan with CCL, full power is maintained all the way to the lamp even when very long cables are used. This means uniformly high light output indepent from cable length.
Features
- Lens-less MAX Technology: Easy to use
- Around 30 % brighter than AS 40
- Compensation for Cable Losses (CCL)
- Tubular steel yoke
- Two disk brakes with steel handles
- Cross-Cooling allows safe operation at extreme tilt angles
- Suitable for high frame rate images
- IP Rating IP23
-
ARRI M40/ 4000W WITH HIGHSPEED BALLAST 1000HZ
A member of the ARRI M-Series, the M40 is a lens-less system that unifies the advantages of Fresnel and PAR fixtures. The unit is open face and thus very bright: around 30 % brighter than an AS40 in spot. Due to its unique, patented MAX Technology reflector, it is also focussable over a range of 18 to 52° Half Peak Angle. The M40 gives a remarkably even beam spread that casts crisp shadows over the whole focus range. The reflector characteristics is optimised for 4,000 W lamps, but can also be used with 2,500 W lamps.
The lamphead is equipped with a CCL module (Compensation of Cable Losses). When operated with the ARRI EB 2.5/4 kW High Speed AutoScan with CCL, full power is maintained all the way to the lamp even when very long cables are used. This means uniformly high light output indepent from cable length.
Features
- Lens-less MAX Technology: Easy to use
- Around 30 % brighter than AS 40
- Compensation for Cable Losses (CCL)
- Tubular steel yoke
- Two disk brakes with steel handles
- Cross-Cooling allows safe operation at extreme tilt angles
- Suitable for high frame rate images
- IP Rating IP23
-
ARRI M8/ 800W WITH HIGHSPEED BALLAST 1000HZ
The M8 is the latest and smallest lighting fixture in ARRI’s highly successful M-Series of HMI lampheads. Like the rest of the M-Series, the M8 is equipped with MAX Technology, a unique, patented reflector design that unifies the advantages of a Fresnel and a PAR fixture.
The combination of an open face design and the unrivalled efficiency of the MAX Technology reflector makes the M8 exceptionally bright; in fact, the light output produced by its 800 W lamp comes close to the output from a 1,200 W Fresnel or PAR (with lens). The unit can be focused between 15° and 60° just by turning the focus knob, producing a remarkably even light field and a crisp, clear shadow. By eliminating the need for bulky, easily breakable spread lenses, the M8 will speed up workflows on set.
Features
- Lens-less MAX Technology: Easy to use
- Light output comparable to 1,200 W fixture
- Smallest lamphead with MAX Technology reflector
- Highly mobile for a wide range of uses
- Focusable between 15° and 60°
- Cross-Cooling allows safe operation even at 90° tilt
- Uses existing 230 & 245 mm accessories from ARRI True Blue D12 and from Chimera
- Compensation for Cable Losses (CCL)
- Uses existing 575 to 1,800 W cables with international connector
- Suitable for high frame rate images
- IP Rating IP23
- Tilt locks to hold heavy accessories stable
-
ARRI M90/ 9000W WITH HIGHSPEED BALLAST 1000HZ
The M90 closes the gap between M40 and ARRIMAX 18/12, which sits almost exactly in the middle between the two. The unit is focusable from 15° up to 49° just by turning the focus knob, producing a remarkably even light field and a crisp, clear shadow.
The elimination of spread lenses speeds up the workflow on set.The 9,000 W lamp is very similar in size to the 6,000 W lamp, which makes the MAX Technology reflector function perfectly at both wattages. The superior housing and cooling concept have made a very compact design close to the dimensions of the ARRISUN 60.
Together with the latest electronic high speed ballast, EB 6/9 HS with AutoScan, this combination represents the state of the art daylight system for high quality images at high frame rates. All EB 6/9 kW ballasts are equipped with CCL module (Compensation of Cable Losses) enabling full power is maintained all the way to the lamp even when very long cables are used. This means uniformly high light output independent from cable length. Since the accompanying EB 6/9 kW ballast uses the housing of the current EB 6000 Baby, the 6 kW Head-to-Ballast cables are compatible and the whole system is highly efficient and delivers a light output close to a traditional 12 kW PAR (with lens) within the dimensions of a 6 kW PAR system – it punches above its weight!
Features
- Lens-less MAX Technology
- Light output matches a 12 kW PAR (with lens)
- As small and lightweight as a 6 kW PAR
- Can also be used with 6,000 W (120 V nominal) lamps and ballasts
- Tilt locks on both sides hold any heavy accessories
- Easy maintenance
- Weather resistant IP23
- Suitable for high frame rate images
-
ARRI MACRO
ARRI MACRO (T2.8)
- 16MM
- 24MM
- 32MM
- 40MM
- 50MM
- 100MM
-
ARRI MASTER PRIME SET
ARRI MASTER PRIME T1.3 SET A
- 18MM
- 25MM
- 35MM
- 50MM
- 75MM
ARRI MASTER PRIME T1.3 SET B
- 21MM
- 27MM
- 32MM
- 40MM
- 65MM
ADDITIONAL LENSES
- 16MM
- 100MM
- 135MM
-
ARRI ORBITER
Orbiter is an ultra-bright, tunable, and directional LED fixture from ARRI. All systems in Orbiter are completely new and designed with versatility in mind.
Changeable optics is the core innovation in Orbiter. With a wide variety of optics to choose from, Orbiter transforms into the perfect light for your application without sacrificing beam, output, or color quality. The Quick Lighting Mount (QLM) in Orbiter allows for optics with vastly different properties to be connected to the fixture.
-
ARRI SIGNATURE PRIME SET
ARRI SIGNATURE PRIME SET
- 18MM
- 25MM
- 35MM
- 58MM
- 75MM
- 125MM (T1.8) — Additional Lenses
-
ARRI SKYPANEL S120C-COLOR
The SkyPanel Family. Different sizes for different applications.
The ARRI SkyPanel has always been known for its tremendous output and large light aperture. The new S360-C has expanded ARRI’s LED soft light range with the largest and brightest SkyPanel to date. Not only is the S360-C powerful, but it is packed full of exciting features, making it one of the most versatile LED fixtures on the market. Features include full color control, lighting effects on a huge aperture, wireless DMX built in, a unique carbon fiber yoke, and much more. The S360-C is truly a beast of a light.
-
ARRI SKYPANEL S30C- COLOR
The SkyPanel Family. Different sizes for different applications.
The ARRI SkyPanel has always been known for its tremendous output and large light aperture. The new S360-C has expanded ARRI’s LED soft light range with the largest and brightest SkyPanel to date. Not only is the S360-C powerful, but it is packed full of exciting features, making it one of the most versatile LED fixtures on the market. Features include full color control, lighting effects on a huge aperture, wireless DMX built in, a unique carbon fiber yoke, and much more. The S360-C is truly a beast of a light.